VARI=ChangePage

VARI=JavaPayPal

spac.gif (845 bytes) rigthbgtop.gif (1463 bytes)
spac.gif (845 bytes)
AK Receiver Internals
AK-47 80% Receivers
AK-47 Accessories
AK-47 Barrels/Brakes
AK-47 Parts
AK-47 Trigger Parts
AK-47, 74 Parts Kits
AK-74 Repair Parts
AMD-65 Parts
Ammunition
AR-15 M-16 Parts
Combo Deals
Foreign Currency
Full Auto Parts
M-48 FBP-9 Kits
Magazines
Manuals & Books
RPK Parts
SKS Parts
Sold Out Items
Sten Parts
Stocks
Suomi M-31 parts
Tools
US Compliance Parts

Contests
Links & Info
Search Page
First Page
UPS tracking
FAQ
Restrictions
About Us
Contact Us
Conditions


AK-47 80% Receivers


spac.gif (848 bytes)

80% Receivers can ship anywhere to anyone in the US no FFL required.

(1POLAKBND) AK-47 / AK-74 Polish 80% Receiver NO FFL REQUIRED
Polish made 80% complete Folded Receiver. These receivers are mfg in Poland and will work for any AK-47 or AK-74 build that uses the common 1 mm thickness (.040) stamped receiver. These are NOT the Polish Tantal receivers, these ARE the Standard Polish made AK-47 80% finished Receivers that are already folded.

Sales Price: $ 49.95
Qty:  
AK-47 Receiver Bolt Kit NEW KIT!! MORE BOLTS!!
The NEW bolt kit contains all the bolts needed to assemble your AK type receiver without rivets. Absolutely the Best Bolt kit available on the market. Now improved with more bolts for building the Yugoslavian underfolders too!! More Bolts added for AK-74 builds and also NEW bolts added to correct an oversize rear trunnion!!

Sales Price: $ 11.95
Qty:  
(AK47RK) AK-47 Receiver Rivet Kit
New and Improved Rivet kit contains all the rivets you need to assemble your AK type receiver and a few extra!!.. Absolutely the Best Rivet kit available on the market!! All rivets are Made in the USA. We've added some new rivet lengths too!! You get a total of 24 rivets in each kit. By request we now include 18 rivets approx 10 mm in length and you will receive 3 long rivets approx 1.5" , 2 may be used for the rear trunion block and one to install your cross support sleeve. AND NOW 3 EXTRA LONG RIVETS!! For those exrta thick receiver installations. These are all round head rivets. Now you can choose for yourself to mount that rear block with short rivets or long! YES , THESE KITS WILL WORK FOR UNDERFOLDER AK'S SIDEFOLDER AK'S AND THE DRAGUNOV RIFLE TOO!! OUR COMPETITOR's KITS MAY NOT!!

Sales Price: $ 8.95
Qty:  
(AK47RKCOMBO) AK-47 Receiver Rivet Kit/Cross Bushing Combo
This Rivet kit also includes a AK center crossmember support bushing! New and Improved Rivet kit contains all the rivets you need to assemble your AK type receiver and a few extra!!.. Absolutely the Best Rivet kit available on the market!! All rivets are Made in the USA.WE DO NOT USE UNDERCUT HEAD RIVETS IN OUR KITS. UNDERCUT RIVETS ARE DANGEROUS AS THEY MAY APPEAR TO BE INSTALLED CORRECTLY BUT WILL FAIL AND OFTEN FALL OUT WHEN YOUR WEAPON IS FIRED. We've added some new rivet lengths too!! You get a total of 24 rivets in each kit. By request we now include 18 rivets approx 10 mm in length and you will receive 3 long rivets approx 1.5" , 2 may be used for the rear trunion block and one to install your cross support sleeve. AND NOW 3 EXTRA LONG RIVETS!! For those exrta thick receiver installations. These are all round head rivets. Now you can choose for yourself to mount that rear block with short rivets or long! YES , THESE KITS WILL WORK FOR UNDERFOLDER AK'S SIDEFOLDER AK'S AND THE DRAGUNOV RIFLE TOO!! OUR COMPETITOR's KITS MAY NOT!!! These are AKParts.com exclusive items. Absolutely the Best Rivet kit available on the market. BAR NONE Compare ours to theirs. Our Rivet kits are made exclusively for AKParts.com only. We do not purchase ours from other vendors. Proudly Made in the USA.

Sales Price: $ 11.95
Qty:  
(AKFTHOLES) AK CARBON STEEL Receiver Flat With Rails AK-47 AK-74
BACKORDERED The NEW Design flat with rails has the top rail already bent for you as seen on the Yugo flats but these fit the standard AK-47 and AK-74!!! They're mfg from High carbon steel and alot cheaper than the moly flats! Includes flat with trunnion holes drilled, includes both rails. TRUNNION HOLES ARE DRILLED ON THESE. Great for std AK-47 or AK-74 builds. A template is not included with the flats. If you need a template just request one in the comments section of the order. THESE WORK GREAT WITH OUR RECEIVER BENDING JIGS IN THE TOOLS SECTION!! These are the standard AK thickness of 1.0 mm (about .040 thick)

Sales Price: $ 0.00
Qty:  
AK-47 74 Receiver Bolt Guide Rails Heat Treated
These are the heat treated rails. Work great for Semi projects or can be made to work with Class II projects with some minor clearance work. Hardened 4130 These may appear black in color due to the heat treat process.

MSRP: $ 29.95
Sales Price:
$ 24.95
Qty:  
(ALRAILSTD) AK-47 74 Receiver Bolt Guide Rails SOLD OUT
SOLD OUT These are the NEW upgraded rails. They are original design AK rails. Work great for Semi projects and are super full auto replacements as well. Must be heat treated.

Sales Price: $ 0.00
Qty:  
(RUSTYAKFLATNORAILS) AK-47 AK-74 Receiver Flat Only No Rails SOLD OUT
SOLD OUT ATTENTION BUDGET BUILDERS!! CLEAN THEM UP AND SAVE SOME $ RUSTY AK-47 AK-74 Receiver Flat Only No Rails. These are mixed types and may include the new style flats with the top already bent for you, or the old style flats with the top unbent, trunnion holes and without trunnion holes luck of the draw only no choice. These are sold without the rails. For the customer that already has the bolt guide rails and needs just the flat alone. These are all the standard AK thickness of 1.0 mm (about .040 thick) THEY'RE RUSTY AND MIXED TYPES BUT THEY'RE SUPER CHEAP. $5.00 Ea While Supply Lasts.

Sales Price: $ 0.00
Qty:  

spac.gif (848 bytes)
spac.gif (848 bytes)

$ 11.95


AK-47 Receiver Bolt Kit NEW KIT!! MORE BOLTS!!

spac.gif (848 bytes)

spac.gif (848 bytes) AKParts.com. All rights reserved.

spac.gif (848 bytes)
rigthbg.gif (887 bytes)
leftbgbot.gif (1462 bytes) spac.gif (845 bytes) rigthbgbot.gif (1456 bytes)